FuzzyScan
Pr
og
ram
mi
ng Man
ua
l
Configure Your FuzzyScan
78
[Data Replacer]
Scan “Replacer Control” and set bar code symbology to
“
48
”.
Scan “1st Replacement” and set the identified position to
“
00
”, then replaced character to “
41
” (Hex Code of A).
[Data Organizer]
Scan “Organizer Control” and set bar code symbology to
“
48
”.
Scan “1st Organization” and set the identified position to
“
16
”, then set the data transmission to “
0
” (forward).
Scan “2nd Organization” and set the identified position to
“
17
”, then set the data transmission to “
1
” (backward).
Scan “
END
” (Exit) to terminate the programming.
[Important Notice]
Please note that Condensed DataWizard will follow the
preset working flow as below:
Verifier
Formatter
Replacer
Organizer
So when you set the identified position in Data Organizer,
you must consider the inserted data which you already set
via Data Formatter.