Cimon CM-HP07CD-AER, Руководство пользователя

Страница: 62 / 80

Total Solution for Industrial Automation
53
Chapter 7 Maintenance Work and Repair
7 Maintenance Work and Repair
To maintain Hybrid Xpanel in the best condition at all times, daily and routine checkups
are essential. The environmental conditions such as dust and moisture might cause
problems on terminals and these problems shorten the durability of I/O module.
Therefore, it is recommended to perform a regular checkup to maintain its ideal
performance. The following describes what is to be done in a maintenance work.
7.1 Maintenance Work
 Daily checkup
There are two items that should be checked daily.
(1) LED status of module
LED of module Item to check
Power Always On (otherwise indicates problems)
Input / Output module
Lighting when output On, lights out when output Off
(otherwise indicates problems)
(2) Connection status of cable
Check if the cables are tightly attached to the connector of the product.

Maintenance
There are items that should be checked once or twice every six months or a year. Also,
perform maintenance work if there is a relocation of devices or shifts in wiring.
(1) General standard items
Item Item to check
Operating temperature -10 ~ 55℃ (14 ~ 131℉)
Operating humidity 10 ~ 95%
Ambient conditions Avoid corrosive gases and dusts
(2) Power supply voltage checkup
Check if the AC and DC input voltage conform to the standards (AC 88-264V, DC19.2-
28.8V).
(3) Installation status of product
Check if the product is solidly mounted on the panel and debris-free.