Total Solution for Industrial Automation
Precautions for Grounding (
Warning)
When you connect product’s SG (Signal Ground) and other device’s SG, make sure that
short circuit is prevented.
The FG terminal is located in the input power connector of product. Connect a ground
wire to the
side of the connector.
When grounding WG terminal, make sure to separate it from other devices.
Connect the FG terminal on the power supply to an exclusive ground. When supplying
power to the product, be sure to separate the input, output and power cables.
If exclusive grounding is not possible, use a common grounding point. Use grounding
resistance of your country’s applicable standard for the grounding point.
Do not use common grounding as third method illustrated below, since it can lead to
electric shock or device breakdown.
If the device does not function properly when grounded, disconnect the ground wire
from the FG terminal.
Precautions for Disposal (
Caution)
When the product is disposed of, it should be done so according to your country’s
regulations for similar types of industrial waste.
Содержание CM-HP07CD-AER
Страница 1: ......
Страница 80: ...01 11 2019 ...