Cima BLITZ 45, Инструкция по эксплуатации и обслуживанию

Страница: 87 / 108

4-2012
Blitz 45 - 50 - 55
79
15.4 - INSPECTION AND CLEANING PUMP FILTER
The pump is provided by the suction side of a filter to prevent the accidental entry
of foreign bodies in the pump body, such a possibility does not constitute a hazard
and can only cause damage to the impeller shown by a drop in pressure reported
by gauge..
The clogging of the filter pump causing an immediate lowering of pressure delivery.
If necessary check the cleanliness of the filter:
1. Position the lever of the three-way cock (P2) in position
"B"
.
2. For the versions fitted with spray-line rinsing tank position the lever of cock (P24) in position "c".
3. Unscrew the plug (1) and eventually remove the foreign body present in to the filter.
4. If necessary, unscrew the nuts (2) and remove the filter (4), to clean completely.
5. Replace the filter by paying attention to the conditions and the proper placement of the O.Ring (5).
6. Close the screw plug (1).
7. For the versions fitted with spray-line rinsing tank position the lever of the cock (P24) in position
"a".
8. Position the lever of the three-way cock (P2) in position
"A"
- WORKINGNSPECTION AND
CLEANING PUMP FILTER
1
1
2
3
4
5
LEGEND
1. SCREW PLUG WITH CHAIN
2. NUT
3. WASHER 4. PUMP FILTER
5. O.RING
00985
Additional agitation pump
1. Close the cock (P18): position “
c
”.
2. Unscrew the plug (1) and eventually remove the foreign body present in to the filter.
3. If necessary, unscrew the nuts (2) and remove the filter (4), to clean completely.
4. Replace the filter by paying attention to the conditions and the proper placement of the O.Ring (5).
5. Close the screw plug (1).
6. Open the cock (P18): position “
a
”.