4-2012
Blitz 45 - 50 - 55
43
5.2 - MOUNTING OF THE TRANSMISSION SHAFT
The mounting, disassembling or possible other interventions on the transmis-
sion shaft must be carried out with the engine switched off and with the starter
key removed from the tractor’s control panel.
USE TRANSMISSION SHAFTS WITH CE CERTIFICATION.
OBSERVE THE REGULATIONS CONTAINED IN THE USE AND MAINTENANCE BOOK-
LET PROVIDED BY THE SHAFT MANUFACTURER.
5.2.1 - Cardan transmission shafts
The transmission shaft mounting has to be carried out when the 2 PTO are coaxial, or, shouldn’t this
be possible, when their axes are parallel. In this case, the misalignment has to be such to PREVENT
the transmission shaft articulated joints to operate with an angle exceeding a 15° maximum width.
1
2
2
“BRACKET”
DRAWBAR
3
4
01035
Those working positions can be reached by acting on the drawbar, which is adjustable both in height
and in length.
When some curves are carried out with the power takeoff inserted, the steering angle can be
30° only
if the trailing point is equally distanced with respect to the motion drives. Beyond such a value,
it will be necessary to disengage the power takeoff, in order to avoid any possible breaks and
dangers
.
00220
00221
MAX 15°
Содержание BLITZ 45
Страница 4: ......
Страница 43: ...4 2012 Blitz 45 50 55 35 01169 01171 01170...
Страница 102: ...Blitz 45 50 55 4 2012 NOTES...
