CIAT AQUACIATPOWER ILD-HE Series, Инструкция по эксплуатации

Страница: 24 / 56

Pressures Menu – PRESSURE
Name Status Default Unit Displayed text* Description
1 DP_A - - kPa / PSI Discharge Pressure A Compressor discharge pressure, circuit A
2 SP_A - - kPa / PSI Main Suction Pressure A Compressor suction pressure, circuit A
3 DP_B - - kPa / PSI Discharge Pressure B Compressor discharge pressure, circuit B
4 SP_B - - kPa / PSI Main Suction Pressure B Compressor suction pressure, circuit B
5 PUMP_EWP - - kPa / PSI Inlet unit water pres. Pump entering water pressure
6 PUMP_LWP - - kPa / PSI Outlet unit water pres. Pump leaving water pressure
* Depends on the selected language (French by default).
Inputs Menu – INPUTS
Point name Status Default Unit Displayed text* Description
1 ONOFF_SW open/close open - Remote On/Off Switch Remote on/off switch
2 HC_SW open/close open - Remote HeatCool Switch Remote heating/cooling selection switch
3 SETP_SW open/close open - Remote Setpoint Switch Remote setpoint selection switch
4 LIM_SW1 open/close open - Limit Switch 1 Demand limit switch 1
5 LIM_SW2 open/close open - Limit Switch 2 Demand limit switch 2 (Energy Management Module)
6 LOCK_SW open/close open - Customer Interlock
Customer interlock: When the contact is closed, the unit will be stopped
with no delay. The switch is provided on the customer's terminal block
of the optional Energy Management Module
7 FLOW_SW open/close open - Flow Switch Status Flow switch status
8 DSHTR_SW open/close open - Desuper heater demand Desuperheater status
9 REM_LOCK open/close open - Remote Interlock Status Remote interlock status
10 REVPH_SW open/close open - Reverse Phase Detection Reverse phase detection
11 cp_a1_f open/close open - Compressor A1 failure Compressor A1 failure
12 cp_a2_f open/close open - Compressor A2 failure Compressor A2 failure
13 cp_a3_f open/close open - Compressor A3 failure Compressor A3 failure
14 cp_a4_f open/close open - Compressor A4 failure Compressor A4 failure
15 HP_SW_A open/close open - High Pressure Switch A High pressure switch, circuit A
16 LEAK_A - - V Leakage Detector Val A Leakage detector, circuit A
17 cp_b1_f open/close open - Compressor B1 failure Compressor B1 failure
18 cp_b2_f open/close open - Compressor B2 failure Compressor B2 failure
19 cp_b3_f open/close open - Compressor B3 failure Compressor B3 failure
20 cp_b4_f open/close open - Compressor B4 failure Compressor B4 failure
21 HP_SW_B open/close open - High Pressure Switch B High pressure switch, circuit B
23 LEAK_B - - V Leakage Detector Val B Leakage detector, circuit B
* Depends on the selected language (French by default).
Outputs Menu – OUTPUTS
Point name Status Default Unit Displayed text* Description
1 CP_A1 off/on off - Compressor A1 Compressor A1 command
2 CP_A2 off/on off - Compressor A2 Compressor A2 command
3 CP_A3 off/on off - Compressor A3 Compressor A3 command
4 CP_A4 off/on off - Compressor A4 Compressor A4 command
5 FAN_A1_0 off/on off - Fan A1 Low Speed Fan A1 low speed (optional)
6 FAN_A1_1 off/on off - Fan A1 High Speed Fan A1 command
7 FAN_A2 off/on off - Fan A2 Fan A2 command
8 FAN_A3 off/on off - Fan A3 Fan A3 command
9 FAN_A4 off/on off - Fan A4 Fan A4 command
10 FAN_ST_A 0 to 6 0 - Fan Staging Number Cir A Current fan stage of circuit A
11 VARFAN_A 0 to 100 0 % Variable fan A command Variable fan A command
12 EXV_A 0 to 100 0 % EXV position Circuit A EXV position, circuit A
13 REV_A off/on off - 4-way Refrig. Valve A
4-way refrigerant valve, circuit A: Used to manage cooling / heating /
defrost operation (heat pumps)
14 HD_HTR_A off/on off - Compressor Head Heater A Compressor head heater, circuit A (only units with variable speed fans
controlled through the internal bus)
7 - CONNECT TOUCH CONTROL: MENU STRUCTURE
AQUACIAT POWER EN-24