CIAT AQUACIATPOWER ILD-HE Series, Инструкция по эксплуатации

Страница: 54 / 56

Drive alerts
Code Alarm/Alert Description Action to be taken
VFD alerts
1 Alert 10 V low Contact Manufacturer Agency
2 Alert Live zero error Contact Manufacturer Agency
3 Alert No motor Check the motor connections
4 Alert Mains phase loss Check the VFD supply voltage and the phase balance (±3%)
5 Alert DC link voltage high Check the VFD supply voltage and the phase balance (±3%)
6 Alert DC link voltage low Check the VFD supply voltage and the phase balance (±3%)
7 Alert DC overvoltage Contact Manufacturer Agency
8 Alert DC undervoltage Contact Manufacturer Agency
9 Alert Inverter overloaded Check the VFD output current
10 Alert Motor overtemperature Check the motor temperature
11 Alert Motor thermistor Contact Manufacturer Agency
12 Alert Torque limit exceeded Check the VFD output current
13 Alert Overcurrent Check the VFD output current
14 Alert Earth fault Check if an earth fault exists
17 Alert Control word timeout Check the connections and the shielding of the serial communication cable
23* Alert Internal fan fault Check the internal fan rotation
25 Alert Brake resistor short-circuited Contact Manufacturer Agency
26 Alert Brake resistor Power limit Contact Manufacturer Agency
28 Alert Brake verification Contact Manufacturer Agency
34 Alert Fieldbus communication fault Check the connections and the shielding of the serial communication cable
36 Alert Mains failure Check the VFD supply voltage and the phase balance (±3%)
47 Alert 24 V supply low Contact Manufacturer Agency
49 Alert Motor speed limit exceeded Contact Manufacturer Agency
59 Alert Current limit exceeded Check the VFD output current
62 Alert Output frequency at maximum limit Check the VFD output current
64 Alert Voltage limit Supply voltage too low
65 Alert Control board over temperature Check the space temperature and the VFD fan
66 Alert Heat sink temperature low Space temperature too low
71 Alert PTC1 emergency stop Contact Manufacturer Agency
72 Alert Emergency stop Contact Manufacturer Agency
90† Alert Encoder loss Contact Manufacturer Agency
94 Alert End of curve Contact Manufacturer Agency
95 Alert Torque loss Contact Manufacturer Agency
96 Alert Start delayed Contact Manufacturer Agency
97 Alert Stop delayed Contact Manufacturer Agency
98 Alert Clock fault Contact Manufacturer Agency
243 Alert IGBT defective Contact Manufacturer Agency
247 Alert Capacity board temperature Contact Manufacturer Agency
* Error 24 and 104 possible
† Not applicable to VFD size 102
9 - DIAGNOSTICS
AQUACIAT POWER EN-54