CIAT AQUACIATPOWER ILD-HE Series, Инструкция по эксплуатации

Страница: 15 / 56

5.3 Explore the synoptic screen
The Synoptic screen allows you to monitor the vapour-refrigeration
cycle. The diagram indicates the current status of the unit, giving
information on the unit capacity, the status of water heat exchanger
pumps, and the pre-defined setpoint parameter.
All unit functions can be accessed by pressing the Main menu button.
IMPORTANT: The Synoptic screen display may vary
depending on pumps configuration.
The bell located in the upper-right part of the
screen lights when any fault is detected.
5.4 Start/Stop the unit
With the unit in the Local off mode:
To display the list of operating modes and select the required
mode, press the
Start/Stop button in the upper-right
corner of the Synoptic screen.
Local On
Local On: The unit is in the local control mode and allowed
to start.
Local Schedule
Local Schedule: The unit is in the local control mode and
allowed to start if the period is occupied.
Network
Network: The unit is controlled by network commands and
allowed to start if the period is occupied.
Remote
Remote: The unit is controlled by external commands and
allowed to start if the period is occupied.
Master
Master: The unit operates as the master in the master/slave
assembly and allowed to start if the period is occupied.
(Master button is displayed if Master/Slave Enable).
IMPORTANT:
When entering the menu, please note that the currently
selected item corresponds to the last running operating mode.
This screen is displayed only when the unit is currently
stopped. If the unit was in the running state, then the
Confirm stop message would be displayed.
To start the unit
1. Press the
Start/Stop
button.
2. Select the required Machine Mode.
3. The Home screen will be displayed.
To stop the unit
1. Press the Start/Stop button.
2. Confirm the unit shutdown by pressing Confirm Stop or
cancel the unit shutdown by pressing the Back button.
Home Main Menu
Current control parameters
Start/Stop
Login
Alarms
5 - CONNECT TOUCH USER INTERFACE
System Menu
Go Back
EN-15 AQUACIAT
POWER