Do not climb on a machine. Use a platform to work at height.
Use mechanical lifting equipment (crane, hoist, winch, etc.) to
lift or move heavy components.
For lighter components, use lifting equipment if there is any risk
of slipping or losing your balance.
Use only original replacement parts for any repair or component
replacement. Consult the list of replacement parts that
corresponds to the original equipment.
Do not drain the heat exchange fluid circuit without informing the
site technical / service department or other competent body first.
Close the shut-off valves on the water inlet and outlet and drain
the unit's hydraulic circuit before working on the components
installed on the circuit (screen filter, pump, water flow sensor,
etc.).
Periodically inspect all valves, fittings and pipes on the refrigerant
and hydraulic circuits to ensure that they do not show any signs
of corrosion or leaks.
1 - INTRODUCTION
AQUACIAT
POWER
ILD
EN-8
