Chrysler 2006 Town and Country Скачать руководство пользователя страница 70 | Manualshive

Страница: 70 / 496

Chrysler 2006 Town and Country Скачать руководство пользователя страница 70

Child Restraint

Everyone in your vehicle needs to be buckled up at all
times — babies and children, too. Every state in the
United States and all Canadian provinces require that
small children ride in proper restraint systems. This is the
law, and you can be prosecuted for ignoring it.

Children 12 years and under should ride properly buck-
led up in a rear seat. According to crash statistics,
children are safer when properly restrained in the rear
seats, rather than in the front.

WARNING!

In a collision, an unrestrained child, even a tiny
baby, can become a missile inside the vehicle. The
force required to hold even an infant on your lap
could become so great that you could not hold the
child, no matter how strong you are. The child and
others could be badly injured. Any child riding in
your vehicle should be in a proper restraint for the
child’s size.

There are different sizes and types of restraints for
children from newborn size to the child almost large
enough for an adult safety belt. Always check the child
seat owner’s manual to ensure you have the right seat for
your child. Use the restraint that is correct for your child.

70

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
68
69
70
71
72
...
»

Содержание 2006 Town and Country

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов