Chrysler 2006 Town and Country Скачать руководство пользователя страница 412 | Manualshive

Страница: 412 / 496

Chrysler 2006 Town and Country Скачать руководство пользователя страница 412

Refrigerant Recovery And Recycling

R-134a Air Conditioning Refrigerant is a hydrofluorocar-
bon (HFC) that is endorsed by the Environmental Pro-
tection Agency and is an ozone-saving product. How-
ever, the manufacturer recommends that air conditioning
service be performed by dealers or other service facilities
using recovery and recycling equipment.

NOTE:

Use only manufacturer approved A/C System

Sealers, Stop Leak Products, Seal Conditioners, Compres-
sor Oil, or Refrigerants.

A/C Air Filter — If Equipped

The A/C Filter, if so equipped, is found behind the filter
access door located under the instrument panel on the
passenger side. To replace the filter slide the lock toward
the rear of the vehicle (unlock position). Remove the
access door and pull the filter downward. When install-
ing a new filter, ensure its proper orientation. Align the

black arrow on the bottom of the filter frame with the
direction of airflow (away from the blower motor and
towards the center of the car).

Refer to the “Maintenance Schedules” section of this
manual for the recommended air conditioning filter
replacement intervals.

Power Steering — Fluid Check

Checking the power steering fluid level at a defined
service interval is not required. The fluid should only be
checked if a leak is suspected, abnormal noises are
apparent, and/or the system is not functioning as antici-
pated. Coordinate inspection efforts through a certified
DaimlerChrysler Dealership.

⬙

412

MAINTAINING YOUR VEHICLE

«
...
410
411
412
413
414
...
»

Содержание 2006 Town and Country

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов