Chrysler 2006 Town and Country Скачать руководство пользователя страница 184 | Manualshive

Страница: 184 / 496

Chrysler 2006 Town and Country Скачать руководство пользователя страница 184

Convenience Tray And Optional Smoker’s
Package Kit

Located between the instrument panel cupholders is a
convenience tray that has been designed to hold miscel-
laneous small items.

NOTE:

The convenience tray should never be used for

ashes without the optional ash receiver in place. Perma-
nent burn marks may result.

With the optional dealer installed Smoker’s package, a
removable ash receiver is inserted into the convenience
tray location. To install the ash receiver, slide the forward
edge into the convenience tray opening and push down
to lock it into position. For cleaning of the ash receiver, its
removal is accomplished by inserting the end of a key in
the pry slot that is molded into the rear edge of the ash
receiver and then twisting the key slightly.

Rear Cupholders

There are dual stationary cupholders located in the
passenger side rear trim panel and a single stationary cup
holder on the driver side rear trim panel.

There are also dual underseat cupholders for the 2nd seat
passengers. With a bench seat in the 2nd seat position
these cupholders slide out from under the center of the
seat.

If your vehicle is equipped with quad seats in the 2nd
seat position, these cupholders are located on the out-
board side of the seat pedestal.

184

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
182
183
184
185
186
...
»

Содержание 2006 Town and Country

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов