Chrysler 2006 Town and Country Скачать руководство пользователя страница 159 | Manualshive

Страница: 159 / 496

Chrysler 2006 Town and Country Скачать руководство пользователя страница 159

beeps. The tone will remain constant and both red LEDs
are illuminated once the vehicle is within 12 inches (30.5
cm) of the object.

The system can be turned on or off through the electronic
vehicle information center (EVIC) when the vehicle is in
PARK. If the rear park assist system is turned off, a single
chime will sound and the EVIC will display the following
message “PARK ASSIST DISABLED”, when the vehicle is
in reverse.

NOTE:

•

Ensure that the rear bumper is free of dirt and debris
to keep the system operating properly.

•

Jackhammers, large trucks, and other vibrations could
affect the performance of the system.

If Service Park Assist System appears in the EVIC after
making sure the rear bumper is clean please see your
authorized dealer.

ADJUSTABLE PEDALS — IF EQUIPPED

This feature allows both the brake and accelerator pedals
to move toward or away from the driver to provide
improved position with the steering wheel. The adjustable
pedal system is designed to allow a greater range of driver
comfort for steering wheel tilt and seat position. The
switch is located on the right side of the steering column.

Adjustable Pedal Switch

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

159

3

«
...
157
158
159
160
161
...
»

Содержание 2006 Town and Country

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов