Chrysler 2006 Town and Country Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 496

Chrysler 2006 Town and Country Скачать руководство пользователя страница 34

The power sliding door will operate from the switches
located on the trim panel just in front of the power sliding
door, regardless of the child lock lever position. To avoid
unintentional operation of the power sliding door from
the rear seats, press the button located in the overhead
console to disable the switches for the rear seat passen-
gers.

NOTE:

•

The power sliding door switches will not operate if the
vehicle is in gear or the vehicle speed is above 0 mph
(0 km/h).

•

The power sliding door will operate from the remote
keyless entry transmitter, if the vehicle is in Park,
regardless of the child lock lever position.

LIFTGATE

NOTE:

The key that is used to start the vehicle is also

used to lock or unlock the doors and open the liftgate.

To open the liftgate, insert the key into the lock and turn
to the right. On vehicles equipped with power locks the
liftgate can also be unlocked using the remote keyless
entry or by activating the power door lock switches
located on the front doors.

Once unlocked, on vehicles equipped with power locks,
the liftgate can be opened or closed without using the
key. To open the liftgate, depress the liftgate release
switch located on the underside of the license plate bar
and pull the liftgate open with one fluid motion.

34

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
32
33
34
35
36
...
»

Содержание 2006 Town and Country

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов