Chrysler 2006 Town and Country Скачать руководство пользователя страница 351 | Manualshive

Страница: 351 / 496

Chrysler 2006 Town and Country Скачать руководство пользователя страница 351

NOTE:

•

Tighten the fuel filler cap until you hear a “clicking”
sound. This is an indication that the fuel filler cap is
properly tightened. If the vehicle diagnostic system
determines that the fuel filler cap is loose, improperly
installed, or damaged, GASCAP will be displayed in
the instrument cluster odometer. Tighten the fuel filler
cap properly and press the odometer reset button to
turn the GASCAP message off. If the problem contin-
ues, the message will appear the next time the vehicle
is started. See Section 7 of this manual for more
information. Make sure that the fuel filler cap is
tightened each time the vehicle is refueled.

•

When the fuel nozzle “clicks” or shuts off, the fuel
tank is full.

WARNING!

•

Never have any smoking materials lit in or near
the vehicle when the gas cap is removed or the
tank filled.

•

Never add fuel to the vehicle when the engine is
running.

•

A fire may result if gasoline is pumped into a
portable container that is inside of a vehicle. You
could be burned. Always place gas containers on
the ground while filling.

STARTING AND OPERATING

351

5

«
...
349
350
351
352
353
...
»

Содержание 2006 Town and Country

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов