Chrysler 2006 Town and Country Скачать руководство пользователя страница 136 | Manualshive

Страница: 136 / 496

Chrysler 2006 Town and Country Скачать руководство пользователя страница 136

3. Pull the release strap “3” located at the bottom of the
seat to disengage the front attachments.

4. The seat assembly can now be removed from the
vehicle and moved on its Easy Out

威

Rollers.

To reinstall the 50/50 rear seat, lower the head restraint to
the full down position, tilt the seat forward and engage
the front floor attachments, then tilt the seat rearward to
engage the rear attachments. Pull the seatback release
lever to return the seatback to its full upright position.
Ensure that the seatback is fully latched in the upright
position.

WARNING!

In a collision, you or others in your vehicle could be
injured if seats are not properly latched to their floor
attachments. Always be sure the seats are fully
latched.

Release Strap Location

136

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
134
135
136
137
138
...
»

Содержание 2006 Town and Country

















































































































































































































































































































































































































































































































Отзывы:

Нет отзывов