chromasens allPIXA, Руководство пользователя

Страница: 32 / 199

CD40047_R04_allPIXA_User-Manual.docx 32
5
allPIXA camera - Connections and status LED
On the back side of the camera, you find the following:

Two CameraLink ports (port 1 and 2) for image signalling and for communication between
the allPIXA camera and the PC

A digital port (IO interface D-Sub 15 female) for the incremental encoder signal, light
barriers, and other freely-programmable inputs and outputs

A serial port (serial RS 232 D-Sub 9 female, Config UART) for additional communication
(for example configuration signals) between the allPIXA camera and the PC

A power connection (Hirose HR10A-7R-6P, male) for power supply

A multi-color LED for indicating the allPIXA camera status
NOTE If you use a USB to Serial converter for the connection via RS232, use one
with an FTDI Chipset (Prolifix chipsets did generate problems while
connecting to the camera).
Figure 17: The allPIXA camera connections and status LED
5.1 Status LED
During image output (VSync active), the LED lights up in blue, and alternates then in green or
red.
Color Description
Green
Camera ready (VSync inactive)
Red Error (VSync inactive)
Blue allPIXA camera image output (VSync active)
CL-Port 1
CL-Port 2
Digital IO-Port
Status LED
Power supply
Config. UART