Christopeit Sport 1908, Инструкция по сборке и использованию

Страница: 19 / 72

19
Step 5:
Installation of the footrests (43) at footrest holder (44).
1.
Push the right footrest (43R) onto the footrest holder (44R).
Adjust the holes in the parts so that they are aligned.
2.
Push the screws M6x50 (42) from above through the holes. Push
from the opposite side on a washer (45) and spring washer (46),
screw on a handgrip nut (47) and tighten firmly.
3. Install the left footrest (43L) on the left footrest holder (44L) as
described in 1. – 2. (Note: The position adjusted in this way
should always be equal at both sides. The right and left footrests
can be discerned by the edges ofthe longitudinal sides of the
footrests. The high edges of the footrests (43)must point inwards
(towards the main frame.) The positions can change as desired
at all times by removing the carriage bolts (42) and sliding the
footrests on the footrest brackets to get a comfortable exercise
position close to the hand grip.)
Step 8:
Attach the power.
1.
Please insert the plug of adaptor (13) to the power plug (39) at
end of chain guard (98).
2. Please insert the plug of adaptor (13) to the jack of wall power
(230V~50Hz).
Step 6:
Attach the handle grip (3) at support (30).
1.
Push a spring washer (32) and a washer (31) onto each screw
M8x20 (33).
2.
Place the handle grip (3) against the holder at support (30) and
tighten the handle grip (3) at handlebar support (30) firmly.
3. Attach the grip cover (18) at handle grip (3) and secure with
screw M5x15 (102).
Step 7:
Attach the computer (1) at support (30).
1.
Put the plug of connection cable (34) into the plug from com-
puter (1) backside.
2.
Insert the plug of pulse connection cables (16) to the jack of
the computer (1) and attach the computer (1) to top monitor
bracket of front post (30) with screws M5x10 (15). (Attention:
Ensure that the cable loom are not crunched or pinched during
installation.)
Step 9:
Checks
1.
Check the correct installation and function of all screwed and
plug connections. Installation is thereby complete.
2. When everything is in order, familiarize yourself with the ma-
chine at a low resistance setting and make your individual
adjustments.
Note: Please keep the tool set and the instructions in a safe place
as these may be required for repairs or spare parts orders becoming
necessary later.
English