manualshive.com logo in svg

Christie MicroTiles, Инструкция по установке и настройке

Поделиться
Скачать
Christie MicroTiles Скачать руководство пользователя страница 6

Term

Definition

Canvas

A group of tiles and ECUs that are connected together electronically. To constitute a
canvas, tiles do not need to be physically adjacent to one another. The maximum
number of tiles in a canvas is 200, and the maximum number of ECUs is 16.

Array

A group of tiles that are physically connected to each other. A canvas may include
multiple arrays. Video sources are mapped to arrays of tiles. Each array represents a
new source mapping.

Sub-array

A group of tiles within an array that are configured to display either the local or
global video source. A single array may contain multiple subarrays.

Media Source

Provides the source for the input signal.

Global Source

The media source connected to the master ECU also functions as a “global source”.
The global source can be displayed on any group of tiles connected to the local
source input (HSSL-1) side of the master ECU. In a closed loop canvas, all tiles can
display the global source.

Local Source

The media source connected to an ECU as a “local source”, feeding the local set of
tiles connected to its local source output (HSSL-2).

Open/Closed Loop

An open loop canvas terminates with the last tile in the canvas, which is not
connected back to the first ECU. In a closed loop canvas, the last tile in the canvas is
connected back to the first ECU. There are no unused Display Port connections in a
closed loop canvas.

Product documentation

For installation, setup, and user information, see the product documentation available on the Christie

Digital Systems USA Inc. website. Read all instructions before using or servicing this product.

1. Access the documentation from the Christie website:

•

Go to this URL: http://bit.ly/2wOrulU
or
https://www.christiedigital.com/en-us/business/products/microtiles

•

Scan the QR code using a QR code reader app on a smartphone or tablet.

2. On the product page, switch to the Downloads tab.

Related documentation

Additional information on the MicroTiles is available in the following documents.

•

Christie MicroTiles Product Safety Guide (P/N: 020-102147-XX)

•

Christie MicroTiles User Manual (P/N: 020-102146-XX)

Product overview

Christie MicroTiles Installation and Setup Guide

6

020-100329-15 Rev. 1 (05-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Содержание MicroTiles












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды