manualshive.com logo in svg

Christie MicroTiles, Инструкция по установке и настройке

Поделиться
Скачать
Christie MicroTiles Скачать руководство пользователя страница 20

A

Adjustment tool

B

Latch

C

Vertical Screws

D

Left foot

E

Center foot

Notice. If not avoided, the following could result in property damage.

•

Do not over-tighten hardware.

•

Do not use power tools to install the hardware.

1. Open the latch on the top of the first tile.
2. Attach the first tile in the array to a left and center leveling foot.
3. Insert the three vertical screws that are shipped with the MicroTiles into the three positions

indicated in the image above (C).

4. Detach the assembly tool from the top of the tiles (A) and hand-tighten the three vertical

screws to mount the tile to the feet.
Do not completely tighten the screws at this point to allow for adjustments. Do not use power
tools to tighten the vertical screws. Do not use the vertical screws as anchors to hang the
array.

5. Assemble the next tile in the array to a center leveling foot only.
6. Using the assembly tool, hand-tighten the two vertical screws to attach the tile to the center

foot.
To allow for adjustments do not completely tighten the screws.

7. Place the second tile inline with the previous tile.
8. Using the assembly tool, hand tighten the vertical screw on the second tile to attach it to the

center foot of the previous tile.

9. Install a screen onto both tiles.

Installation and Setup

Christie MicroTiles Installation and Setup Guide

20

020-100329-15 Rev. 1 (05-2018)

Copyright 

©

 2018 Christie Digital Systems USA, Inc. All rights reserved.

Содержание MicroTiles












































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды