Christie MicroTiles, Инструкция по установке и настройке

Страница: 33 / 43

With this feature enabled, the software detects changes in the array’s setup and configures the
array accordingly. For example, it detects and reconfigures the array when a tile is added or
removed, tiles are moved, subarrays are changed, or manually mapped tiles are changed.
3. To update the array and ensure the most current information is displayed, click Refresh.
4. To force an array reconfiguration manually, click Reconfigure Array.
Creating a subarray
A subarray can increase the input resolution by combining multiple inputs and display two images on
an array. Multiple ECUs must be connected to the array and automatic array configuration must be
enabled.
Multiple ECUs must be connected to the array and automatic array configuration must be enabled.
Manually adding a subarray
Select the specific tiles to include in the subarray.
1. Select Canvas Management > Layout > Subarray Configuration .
2. To get a reading of any subarray regions that have already been created click Refresh.
3. Ensure you are in Add Mode.
4. Click the top left or top right tile within the new subarray.
5. Press Shift and click the bottom right or bottom left tile in the subarray.
You must select tiles in a diagonal configuration (opposite corners) to configure a subarray.
6. When the subarray region has been selected, click Add.
All the subarrays saved on the master ECU are shown in the table.
Automatically adding a subarray
Allow the system to automatically group the tiles into a subarray.
Creating an automatic subarray erases all existing subarrays.
1. Select Canvas Management > Layout > Subarray Configuration .
2. To put all tiles between ECUS into separate subarrays, click Auto Subarray.
3. In the warning dialog, click OK.
Editing a subarray
Change the settings for the subarray.
Automatic array configuration must be enabled for changes to take affect. Edit Mode is grayed out if
no subarray is selected in the table.
1. Select Canvas Management > Layout > Subarray Configuration .
All the subarrays saved to the master ECU are shown in the table.
2. To edit an existing subarray, select it from the table and click Edit Mode.
Once selected, the bottom portion of the window changes to display the subarray properties.
3. To change the width and height of the subarray use the scroll bars to adjust the X/Y Offsets.
Configuring the array
Christie MicroTiles Installation and Setup Guide 33
020-100329-15 Rev. 1 (05-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.