Christie MicroTiles, Инструкция по установке и настройке

Страница: 23 / 43

11. Anchor the MicroTiles using the rear mounting points or bolting the leveling feet into the base
structure so the weight of each tile is individually supported.
A mounting bracket can be purchased from Christie (P/N: 123-107109-xx). For details, see
Christie MicroTiles Specification and Application Guide (P/N: 020-100334-xx).
Unpacking the screens
Take precautions when removing the screens from the packaging.
Notice. If not avoided, the following could result in property damage.
• Always handle the screen from its sides. Do not touch the inside of the screen.
• Remove all jewelry before handling the screen.
• Do not place the screen on a hard surface.
• Do not set the screen on its corner or edge.
• Always wear clean, lint-free gloves when handling the product.
1. Open the box and, without removing it, examine the screen to ensure it has not been damaged
during shipping.
2. Place one hand under the screen’s frame, between the front two foam corners.
3. Carefully lift the frame and screen until the front two foam corners are clear of the box.
4. Remove the front two foam corners.
5. Carefully lower the frame and screen back into the box.
6. With two hands, grasp the sides of the frame and lift the frame and screen together out of the
box.
7. If the work surface is hard (for example, a table top), have another person close the lid of the
box and place the screen on the lid. Otherwise, place the screen on the work surface.
8. Remove the remaining two foam corners.
9. Put on clean gloves.
10. Place one hand lightly on the screen and pull open the plastic bag.
11. Grip the bottom of the bag with one hand and the frame with the other and pull the screen out
of the bag.
12. If you have lifted the screen and bag up while performing step 11, place the screen back on
the work surface or box.
Installing the screens on the tiles
Christie recommends the screens be installed starting from the bottom of the array.
Notice. If not avoided, the following could result in property damage.
• Always handle the screen from its sides. Do not touch the inside of the screen.
• Remove all jewelry before handling the screen.
• Do not place the screen on a hard surface.
• Do not set the screen on its corner or edge.
• Always wear clean, lint-free gloves when handling the product.
Installation and Setup
Christie MicroTiles Installation and Setup Guide 23
020-100329-15 Rev. 1 (05-2018)
Copyright
©
2018 Christie Digital Systems USA, Inc. All rights reserved.