Christie M 4K25 RGB, Инструкция по установке и настройке

Страница: 29 / 76

Packaging tape is required to ensure safe shipment of the projection lens to restrain the zoom
ring from rotating during shipping.
Turning on the projector
When the projector AC power supply is plugged in and the breaker switch is on, the power is on.
Warning! If not avoided, the following could result in death or serious injury.
• SHOCK HAZARD! Do not attempt operation if the AC supply is not within the specified voltage
and current, as specified on the license label.
1. Plug the projector into AC power and turn on the breaker switch.
When plugged in and the breaker switch is on, the projector automatically powers on to
standby mode within 60 seconds. The display panel functionality becomes available.
2. To turn the light source on using the projector keypad, press and hold the Power button
until you hear a beep.
To turn on the light source using the remote, press and hold the ON button until you hear a
beep.
Projector LED status indicators
Identify the LED state colors and meaning.
LED State Description
Blue Solid Standby Light source is off. Video electronics are off.
Projector status is OK.
Flashing Cool down Projector is moving to one of the two standby
states:
• Light source is off and video electronics are
booting up.
• Light source is off. Video electronics and light
source is cooling down.
Green Solid Light source on Light source is on. Projector status is OK.
Flashing Startup Projector is moving to light source on state. Light
source is warming up. Video electronics are
initializing.
Yellow Solid Warning in
standby Projector is in standby state. A problem exists with
the projector that does not prevent it from
operating.
Flashing yellow/green Warning during
startup Projector is in a startup state. A problem exists
with the projector that does not prevent it from
operating.
Flashing Warning with
light source on Light source is on. A problem exists with the
projector that will not cause it to shut down.
Flashing yellow/blue Warning during
cool down Projector is in a cool down state. Light source is off.
Video electronics and light source are cooling
Installation and setup
Christie M RGB Series Installation and Setup Guide 29
020-103483-04 Rev. 1 (04-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.