Christie M 4K25 RGB, Инструкция по установке и настройке

Страница: 26 / 76

Installing a projection lens
The projection lens, shipped separately from the projector, must be installed prior to setting up the
projector.
Notice. If not avoided, the following could result in property damage.
• Always use a lens plug when installing or moving the product. This prevents contaminants from
entering the product.
• Do not insert the lens into the product at an angle. This can damage the lens and the optical
components inside the product.
• Always place the lens cap onto the lens when moving the projector to avoid scratching the lens.
• Remove the lens cap before turning the product on to avoid damaging the lens.
The projector includes a motorized lens mount that allows automated lens control and adjustment:
vertical and horizontal offsets, zoom, and focus. The projection lens is shipped separately from the
projector. Use the lens cap when transporting the lens to avoid scratching and damaging the lens,
which could affect your displayed image.
• Zoom and Focus—Two internal lens motors allow for quick motorized adjustment of zoom and
focus. Adjust zoom to fit the displayed image on the screen and adjust focus to improve the
clarity of the image.
• Lens Offset—The motorized lens mount allows vertical and horizontal offset of the displayed
image.
• Shutter—Sets the screen to absolute black, when in the closed state.
Do not adjust motorized lenses by hand without first setting them for manual operation; otherwise,
the zoom and focus motors may be damaged.
1. Remove the inlet-side lens cap.
Installing the projection lens with the inlet-side cap on can cause physical damage to the
projector. Turning on the projector with the inlet-side cap installed can cause burning and
contamination damage.
2. Ensure the lens cap is on the lens.
3. Ensure the two security screws (A in the image in step 4) are removed.
4. Rotate the lens clamp (B in the image below) to the open position.
Installation and setup
Christie M RGB Series Installation and Setup Guide 26
020-103483-04 Rev. 1 (04-2022)
Copyright © 2022 Christie Digital Systems USA, Inc. All rights reserved.