Hazard
distance
(m)
Throw ratio
Due to the requirements of IEC 62471-5, a minimum of 1 meter hazard distance must be maintained.
For Installations in the United States
The following must be in place for laser-illuminated projector installations in the United States:
•
Any human access to the hazard zone, if applicable, must be restricted by barriers to enforce
the no access zone.
•
Permanent show installations containing Risk Group 3 laser-illuminated projectors must meet
the following conditions:
•
Installed by Christie or by Christie-authorized and trained installers.
Refer to the EXTERNAL - Laser safety awareness training (Course code: CS-ELSA-01) on
the http://www.christieuniversity.com site.
•
Performed according to instructions provided by Christie.
•
Ensure the projection system is securely mounted or immobilized to prevent unintended
movement or misalignment of the projections.
•
A copy of the FDA variance approval letter must be with the operator or other responsible
individual.
•
Temporary show installations containing Risk Group 3 laser-illuminated projectors may be
installed by Christie or sold or leased only to valid laser light show variance holders (laser light
show manufacturers) for image projection applications. Such manufacturers may currently
hold a valid variance for production of Class IIIb and IV laser light shows and/or for
incorporation of the Risk Group 3 laser-illuminated projectors into their shows. This
requirement applies also to dealers and distributors of these laser-illuminated projectors.
Introduction
Christie M RGB Series Installation and Setup Guide
11
020-103483-04 Rev. 1 (04-2022)
Copyright
©
2022 Christie Digital Systems USA, Inc. All rights reserved.
Содержание M 4K25 RGB
Страница 1: ...Installation and Setup Guide 020 103483 04 Christie M RGB Series...
Страница 76: ......
