background image

Warning! If not avoided, the following could result in death or serious injury.

Electric shock hazard. To avoid personal injury, disconnect all power sources before
performing maintenance or service.

Electrocution hazard. To avoid personal injury, always disconnect all power sources
before performing maintenance or service procedures.

Optical radiation hazard. To avoid personal injury, never look directly at the light
source.

Laser hazard. To avoid personal injury, avoid eye or skin exposure to direct or
scattered radiation.

Voltage hazard. To avoid personal injury, always disconnect all power sources before
performing maintenance or service procedures.

Caution! If not avoided, the following could result in minor or moderate injury.

Hot surface hazard. To avoid personal injury, allow the product to cool for the
recommended cool down time before touching or handling for maintenance or
service.

Burn hazard. To avoid personal injury, allow the product to cool for the recommended
cool down time before handling for maintenance or service.

Moving parts hazard. To avoid personal injury, keep hands clear and loose clothing
tied back.

Moving fan blades. To avoid personal injury, keep hands clear and loose clothing tied
back. Always disconnect all power sources before performing maintenance or service
procedures.

Cut hazard. To avoid personal injury, keep hands clear or wear protective gloves.

Notice. If not avoided, the following could result in property damage.

General hazard.

Not for household use.

Introduction

Christie M RGB Series Installation and Setup Guide

13

020-103483-04 Rev. 1 (04-2022)

Copyright 

©

 2022 Christie Digital Systems USA, Inc. All rights reserved.

Содержание M 4K25 RGB













































































Отзывы: