Christie D4K25, Руководство по обслуживанию

Страница: 121 / 138

Section 7: Serial API
D4K25 Service Manual 7-27
020-100880-01 Rev. 1 (06-2012)
Cxxx
Replace xxx with the channel number. Valid range is 101-164.
NONE Select output reference polarity for the current channel.
EXAMPLES:
(TOP+C101 1) Set Output Reference Polarity to 1 on channel 101
(TOP+C101?) Get Output Reference Polarity on channel 101
USER ID (UID)
Allows users to login to the serial interface.
SUBCODE DESCRIPTION OF USE
NONE None
EXAMPLES:
(UID) “username” “password”) Login a user
(UID) Logout the current user, also happens automatically when a new user logs in
(UID?)(UID! “username” 01) Display the current logged in user and their access level
ZOOM LENS POSITION ADJUSTMENT (ZOM)
Adjust lens to specific zoom position with a specified direction (1, -1). NOTE: This command can only be used to
update the current ILS file. Changing the zoom for the current channel will change the zoom for any channel using
the same ILS file.
Use command without subcode:
• If ILS is ON, motor will move to specified steps and save data to the active channel.
• If ILS is OFF, motor will move to specified steps, do not save data to the active channel.
SUBCODE DESCRIPTION OF USE
BACN Motor backlash in negative direction. Read-only.
BACP Motor backlash in positive direction
. Read-only.
CALB
Calibrate travel range and backlash on specified. Only valid parameter for this command is 1. Set only
command.
Cxxx
Replace xxx with the channel number. Valid range is 101-164.
NONE
Moving lens mount to a specified vertical position.
RNGN
Motor moving range in negative direction
. Read-only.
RNGP
Motor moving range in positive direction
. Read-only.
RSET
Move motor to the center flag then move back to current position. Only valid parameter for this command
is 1. Set only command.
STRT
Start motor moving in specified direction, where direction can be (-1, 1). Write-only for v1.3 or newer.
3D OUTPUT REFERENCE POLARITY (TOP) (Continued)