Christie D4K25, Руководство по обслуживанию

Страница: 119 / 138

Section 7: Serial API
D4K25 Service Manual 7-25
020-100880-01 Rev. 1 (06-2012)
OUTPUT REFERENCE DELAY (TIME) (TDT)
Set output reference delay time for 3D control. This command controls how much delay between the input and out-
put reference timing.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid range is 101 - 164.
NONE Select reference delay for the current channel
EXAMPLES:
(TDT+C101 1) Set output reference delay time to 1 on channel 101
(TDT+C101?) Get output reference delay time on channel 101
L/R DISPLAY SEQUENCE (TFD)
Set L/R Display Sequence for 3D control. This selects which signal is considered first in the source signal, the left
or the right.
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid range is 101 - 164.
NONE Select L/R display sequence for the current channel
EXAMPLES:
(TFD?L) List all entries on Input Frame Dominance control
(TFD+C101 1) Set Input Frame Dominance to 1 on channel 101
(TFD+C101?) Get Input Frame Dominance on channel 101
3D FRAME RATE MULTIPLE (TFR)
Setup frame rate multiple for 3D control
SUBCODE DESCRIPTION OF USE
Cxxx Replace xxx with the channel number. Valid range is 101 - 164.
NONE Select 3D frame rate for the current channel.
EXAMPLES:
(TFR?L) List all entries on the frame rate multiple factor
(TFR+C101 3) Set frame rate multiple to “4:2” on channel 101
(TFR+C101?) Get frame rate multiple on channel 101
GET CERTIFICATES (TIG)
Gets the ICP certificate.