Christie D4K25, Руководство по обслуживанию

Страница: 60 / 138

5-8 D4K25 Service Manual
020-100880-01 Rev. 1 (06-2012)
Section 5: Parts and Module Replacement
5.4.7 Lamp Door
(Estimated Replacement Time: 4 minutes)
Remove the lamp door to access components in
the lamp compartment. The lamp door can be
removed entirely from the projector or it can
remain tethered and opened up to 90°. Fixed to
the inside of the door is a set of commonly used
hex keys required during lamp replacement.
1. Unlock and open the lamp door (
Figure 5-6 ).
2. Unhook the securing tether on the right-side
of the door.
3. To release the door, slide the locking pin
(accessible through the cutout located on the
right side of the door) to the left.
5.4.8 LVPS/LPS Cover
(Estimated Replacement Time: 4 minutes)
Remove the LVPS/LPS cover on the operator’s side of the
projector to access the Lamp Power Supply (LPS)
connections, AC Relay and LVPS.
1. Using a #2 Phillips
™
, loosen the three captive screws
from the top of the cover ( Figure 5-7 ).
2. Lift the cover up just enough for the bottom tabs to
clear the frame and remove.
3. When re-installing, align and insert the bottom tabs
first, then secure the cover with the screws.
Figure 5-6 Open Lamp Door
Figure 5-7 LVPS/LPS Cover