Christie CP42LH, Руководство по обслуживанию

Страница: 39 / 90

CP42LH Service Manual 39
020-101686-03 Rev. 1 (08-2016)
Parts and Module Replacement
When reinstalling a module, follow the removal instructions in reverse unless otherwise indicated.
See
Interconnections on page 88 when re-connecting harnesses. Make sure the system is
disconnected from AC power before you start repairing, removing, or installing any modules. This
system is internationally approved and is designed for safe and reliable operation. To assure
complete safety at all times, the following precautions must be taken during servicing and the
original projector design must remain intact.
Safety warnings and guidelines
• Read and adhere to all safety warnings and guidelines. See See Safety Information on page
11.
• Always turn off and disengage all power sources to the system before servicing. See Shut down
the projector on page 41.
• When re-connecting harnesses, see Interconnections on page 88.
Tools required
• Security lid keys
• Convergence Tool Set - 2.5 mm driver with heat-shrink tubing (2.0 inch and 6.5 inch lengths)
• Long and stubby neck magnetic-tip Phillips screwdrivers—#1, #2, #3
• Slot screwdriver
• Hex keys/drivers: 1.5 mm 2.5 mm, 3 mm, 5 mm, 6 mm
• Nut driver: 5.5 mm, 6 mm
• Ratchet: 19 mm
• Pliers
• Electrostatic protective strap and pad
• Disposable Nitrile gloves (included with optical components)