Chopin Mixolab, Руководство по обслуживанию

Страница: 68 / 144

68 Chapter 3 Repair
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
1. Remove the left and right casings (see op. 1-1) as well as the
central casing (see op. 1-2) .
2. Turn the unit on its right side and place a wedge under the tank
assembly (
A ).
In this configuration the unit has a limited stability, take care
that it does not fall over.
3. Undo the two attachment screws of the solenoid valve protect-
ing cover (
B ), remove the cover.
4. Unscrew the attachment screw of the valve connector ( C ), then
remove the valve connector.
5. Unscrew the knurled nut attaching the solenoid valve head (D)
(if necessary use water pump pliers) and remove the valve
head.
6. Unscrew the external fitting from the valve (marked "IN") ( E ).
7. Remove the water solenoid valve.
Refitting the new water solenoid valve does not require any
particular instruction.
4 : Hydraulic components
Operation 4-6 Dismantling/installing the water solenoid valve assembly wired
connector
Sheet: 1/ 1
Consumables:
Tools:
-
Water pump pliers
B
A
C
E
D