Chopin Mixolab, Руководство по обслуживанию

Страница: 64 / 144

64 Chapter 3 Repair
Maintenance manual
MM-MIXO-EN Ind. 0
04/2012
Mixolab
1. Remove the right casing (see op. 1-1) .
Note: Record the location of the hydraulic connection on the tank
(see the hydraulic schematic on the previous page). Mark the
position of the bowl against the cap in order to prevent the
level detector from being exposed to the heating part.
Unplug all hydraulic connections on the tank.
2. Unplug the connector of the double level detector on the CPU
board (
A ).
3. Undo the three fixation screws of the tank cap ( B ), then
remove the tank cap.
4. Unscrew the detector from the cap by mean of an open end
wrench (
C ).
Refitting the new double level detector does not require any particu-
lar instruction. Note that the detector needs to be glued to the tank
cap.
Note: For the replacement of the hydraulic tube, make use if needed
of the schematic of Operation 4-1 .
4 : Hydraulic components
Operation 4-2 Dismantling/installing the wired double level detector
Sheet: 1 / 1
Consumables:
Tools:
Glue
-
A C B C