Chison SonoEye P2 Скачать руководство пользователя страница 54

Страница: 54 / 74

Digital Color Doppler Palm Ultrasound System

7. Please don’t use or preserve the system where it is over 50

℃

8. Please carefully check the system surface before using. If there is any abnormal phenomenon (eg.

there’s a leakage on the system surface), please stop using the system immediately and contact our

authorized agent in your country as soon as possible. If you don’t know the contact number of your

authorized agent, please contact us by detail contact information at the end of this chapter.

System maintenance

Please take good care of the system. Collision and dropping is strongly prohibited.

Please use the ultrasound gel which is acknowledged by the manufacture of the unit. We recommend

AQUASONIC Gel made by R. P. Kincheloe Company in USA.

Plug and unplug of system in real-time is strongly prohibited.

Clean the system:

1) System tip

Cleaning: Use a sponge or soft cloth to remove gently the dirt and gel on system tip.

2) Connector, Cable, other part of the system tip must not be soaked in a solution. Simply clean it using a

soft cloth moistened with alcohol and then dry it.

Aeration and let the system become dry in normal temperature.

Please strictly keep the system away from the paint thinner, ethylene oxide, other organic solvent, etc

Please keep the system inside the system case when it is not in use.

Dipping the system into any liquid is strongly prohibited.

Caution

Please immediately stop using the system and system if there is any broken phenomenon on the electricity

cable or the system transducer. Otherwise there will be a danger of the electricity shock.

9.3 Safety Check

To ensure the system work normally, please make a maintenance plan, check the safety of the system

periodically. If there is any abnormal phenomenon with the machine, please contact our authorized agent in

your country as soon as possible.

If there is no image or menu on the screen or other phenomenon appears after switching on the machine,

please do troubleshooting first according to the following check list. If the trouble is still not solved, please

contact our authorized agent in your country as soon as possible.

9.4 Troubleshooting

According to the most frequently occurred errors and system messages, the list of possible causes and

relevant solutions is attached as below:

Содержание SonoEye P2











































































Результаты поиска

Содержание SonoEye P2

Отзывы:

Бренды по названию

Популярные бренды

Chison SonoEye P2, Руководство пользователя

Результаты поиска

Содержание SonoEye P2

Отзывы:

Бренды по названию

Популярные бренды