Chison SonoEye P2, Руководство пользователя

Страница: 39 / 74

Digital Color Doppler Palm Ultrasound System
34
6. Sample Gate
In the real-time state of CFM mode, press the blood flow sampling gate and move it to adjust the position.
In the real-time state of CFM mode, press and hold the lower left corner of the blood flow sampling gate.
After the adjustment mark appears, slide left and right to adjust the horizontal size of the blood flow sampling
gate, and slide up and down to adjust the vertical size of the blood flow sampling gate.
5.3 Parameter Adjustment in PW mode
1. PW Gain
At real-time state, slide left or right in spectrum area to adjust the size of doppler gain, adjustment range
from 0~255, the smallest value of adjustment is 1.
2. Voice
At real-time state, press the display device sound keys to adjust the voice.
3. Angle
At real-time state, press the angle icon to adjust the angle.
4. PW Sample Gate
At real-time state, use two fingers to slide it outward to adjust the size of sample gate.
At real-time state, press the sample gate and move it to adjust the location.
5. Baseline
At real-time state, press the baseline and move it to up and down to adjust the location.
5.4 After Capturing the Image
5.4.1 Adding Annotation
Annotation can be added to an ultrasound image to bring attention, notate or communicate information
observed during the examination. You can add annotations to: zoomed image, cine review image and frozen
image.
WARNING
You must ensure that the entered annotations are correct. Incorrect annotations may cause misdiagnosis!
Operation:
1. Freeze image and slide the menu list to select .
2. The secondary menu appears, press . “
︱
”is displayed in image area and the soft icon board
appeared in the bottom of screen.
3. After the user inputs the comment, press it with a single finger to move it to target position.