Chison SonoEye P2 Скачать руководство пользователя страница 53

Страница: 53 / 74

Digital Color Doppler Palm Ultrasound System

Chapter 9 System Maintenance

9.1 Cleaning

Caution

Before cleaning any part of the system, please make sure that the system is turned off and the power cord is

disconnected from the power supply socket. Otherwise there will be danger of electricity shock.

Cleaning method:

Please use a piece of soft and dry cloth to clean the system. If there’s some dirty difficult to be cleaned,

please use wet cloth to clean system, and then use dry cloth to wipe off the water on the system.

Caution

Please don’t use organic solvent to clean the system; otherwise it will damage the system surface.

Please never allow any liquid get inside the system or system, otherwise it will damage the system and

cause electronic short.

If the system connector is required to be cleaned, please contact our authorized agent in your country in

advance. Any cleaning by unauthorized person may result in system malfunction or affect its features.

9.2 System Maintenance

According to the purposes, the system is used on the surface of patient body.

Caution

No matter which type of examination is performed, please always try to reduce the unnecessary radiation of

ultrasound wave to the patient during the ultrasound examination.

Caution

1. System can only be used by professional doctor who has received professional training of ultrasound.

2. It is forbidden to sterilize and disinfect system by high pressure. If it needs to be used in sterilized

occasion, please use a sterilized disposable system cover on the system.

3. Please avoid drop off or hitting the system by anything.

4. Don’t scratch the system surface while using it.

5. Please use the authorized ultrasound gel during scanning. Using un-authorized gel may cause scratch

or damage to system surface.

6. Please keep the system clean and dry.

Содержание SonoEye P2











































































Результаты поиска

Содержание SonoEye P2

Отзывы:

Бренды по названию

Популярные бренды

Chison SonoEye P2, Руководство пользователя

Результаты поиска

Содержание SonoEye P2

Отзывы:

Бренды по названию

Популярные бренды