Chison SonoEye P2, Руководство пользователя

Страница: 13 / 74

Digital Color Doppler Palm Ultrasound System
8

DO NOT touch patient and devices without IEC/EN 60601-1 approval to avoid the leakage current risk
within the PATIENT ENVIRONMENT.
Unapproved Devices
CAUTION:

DO NOT use unapproved devices.

If devices are connected without the approval of CHISON, the warranty will be INVALID.

The system can’t be used with HF surgical equipment, otherwise the burns to patient may occur.
Any device connected to this system must conform to one or more of the requirements listed below:

IEC standard or equivalent standards appropriate to devices.
WARNING:
Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result
in improper operation. If such use is necessary, this equipment and the other equipment should be observed
to verify that they are operating normally.
CAUTION:
Unsafe operation or malfunction may result. Use only the accessories, options and
supplies approved or recommended in these instructions for use.
Peripheral used in the patient environment
The system has been verified for overall safety, compatibility and compliance with the printer which is
Mopria certified.
CAUTION:
Printing quality may vary depending on the printer. If there is any quality problem,
Chison will not be responsible.
The system may also be used safely while connected to devices other than those recommended above if
the devices and their specifications, installation, and interconnection with the system conform to the
requirements of IEC/EN 60601-1-1.
The connection of equipment or transmission networks other than as specified in the user instructions can
result in an electric shock hazard or equipment malfunction. Substitute or alternate equipment and
connections require verification of compatibility and conformity to IEC/EN 60601-1-1 by the installer.
Equipment modifications and possible resulting malfunctions and electromagnetic interference are the
responsibility of the owner.
WARNING:
Use of accessories, transducers and cables other than those specified or provided by the manufacturer of