Chison SonoEye P2 Скачать руководство пользователя страница 35

Страница: 35 / 74

Digital Color Doppler Palm Ultrasound System

Chapter 5 Imaging

This chapter will introduce image display modes and the operation of image control and adjustment.

5.1 Select Scan Mode

5.1.1 System Identify

The App will identify the system automatically while system is connected.

Caution

When inserting the system, please make sure the surface which has CHISON logo is always upside.

5.1.2 Select Application

Click

icon, the examination interface will pop-up, according to the type of probe to select corresponding

application. Press it to enter into expected exam.

Start App to enter Compound Image automatically.

There are five image display modes: B mode, B/M mode, CFM mode and PW mode, they can be shifted by

the mode icon.

5.1.3 B mode

Click [B] icon to display single B mode image. B mode is the basic operating mode for two-dimensional

scanning and diagnosis.

5.1.4 FHI

Press [Freq.] button to open its sub-menu, select the expected frequency to optimize current image. Press

[Freq.] again to exit FHI selection menu. FHI is used for improving SNR (Signal to Noise Ratio) and remitting

pseudo morphism on current image. Thus, the image quality is improved by this function.

5.1.5 B/M Mode

B/M-mode is used to determine patterns of motion for objects within the ultrasound beam.

Click [M] icon to enter B/M ready mode, then move the M-line to enter B/M mode. B/M mode is fit for heart

scanning and measurement.

5.1.6 CFM Mode

Color Flow Map is a technique for imaging blood flow by displaying flow data such as velocity and direction

on B mode image. Based on Doppler Effect, normally the blood flow moving toward the probe scan direction

is marked in red, while blood flow moving away from probe scan direction is marked in blue. Touch [C] icon,

Содержание SonoEye P2











































































Результаты поиска

Содержание SonoEye P2

Отзывы:

Бренды по названию

Популярные бренды

Chison SonoEye P2, Руководство пользователя

Результаты поиска

Содержание SonoEye P2

Отзывы:

Бренды по названию

Популярные бренды