Chison ECO 6 Скачать руководство пользователя страница 5 | Manualshive

Страница: 5 / 202

Chison ECO 6 Скачать руководство пользователя страница 5

ECO 6 Digital Color Doppler Ultrasound System

surface, probe cable and sheath whether they are abnormal, such as cracking, peeling
and deformation. Also check whether the lens is strongly fixed. Abnormal probes may
cause electric shock and injure the patient. Once any abnormal, user must stop using
and contact CHISON's authorized service engineer.
12.  If  the  probe  is  dropped  or  scratched  by  hard  part,  please  stop  using  the  probe
immediately.  And  contact  CHISON's  authorized  service  engineer  to  make  sure  the
safety and effectiveness is in good condition before use.
13.  If there is any liquid or metal to enter to the system, please power off the system
and  stop  using  it  immediately.  Please  first  contact  CHISON’s  authorized  service
engineer to make sure it’s safe before restart using it.
14.  Please don't  use solvents  (such as paint thinner, benzine, or alcohol) or  abrasive
cleansers for cleaning the system (including monitor and probes, etc). It may corrode
the system and probes.
15.  While  the  system  or  probe  is  over  life  time,  please  refer  to  operation  manual
section 9.4
16.  Important data must be backed up on external memory media. CHISON shall not
be liable for loss of data stored in the memory of this system caused by operator error
or accidents.
17.  Please put this operation manual with the system to ensure operator and manager
can reach it at any time.
18.  LCD display screen may have some dark or light dots, it is normal for the LCD. It
does not mean that LCD screen is defective

.

Caution:

It is prohibited to use the device for fetal sex examination, except for necessary

medical needs. The device can only be sold to qualified medical institutions or doctors. The users

shall fully understand and master the devices before operating. The users shall have got the

qualification, and shall comply with the local laws and regulations, the local religion and customs,

etc.

Caution:

The users should read the operation manual carefully before operating the devices.

Turning on the device means the users have read the operation manual and accept the listed

cautions, warnings, and notes in the manuals. If the users disagree and cannot accept the cautions,

the users can ask for returning the device.

WWW.CFS.IT - CFS PRODOTTI MEDICALI SRL

«
...
3
4
5
6
7
...
»

Содержание ECO 6











































































































































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды