Chison ECO 1VET, Руководство по эксплуатации

Страница: 37 / 173

ECO Series VET Digital Color Doppler Ultrasound System
22
temperature range between 0 degrees C (32 degrees F) and 50 degrees C (122 degrees F).
Long term (3 months or more) storage of battery pack: Store the battery in a temperature range between-20
degrees C (-4 degrees F) and 45 degrees C (113 degrees F); Upon receipt of the ECO and before first time
usage, it is highly recommended that the customer performs one full discharge/charge cycle. If the battery has
not been used for >2 months, the customer is recommended to perform one full discharge/charge cycle. It is
also recommended to store the battery in a shady and cool area with FCC (full current capacity).• One Full
Discharge/Charge Cycle Process:1. Full discharge of battery to let the ECO automatically shut down.2.
Charge the ECO to 100% FCC (full current capacity).3. Discharge of Venue 40 for complete shutdown(takes
one hour for discharge).• When storing packs for more than 6 months, charge the pack at least once during the
6 month timeframe to prevent leakage and deterioration in performance.
3.5.1.4 Operation Space
Please leave enough free space from the back of the system to ensure well ventilation.
Caution: Leave enough free space from the back of the system; otherwise, with the increasing of the
temperature inside the unit, malfunction may occur.
3.5.1.5 System Positioning & Transporting
Moving the System
When moving or transporting the system, take the precautions described below to ensure maximum safety for
personnel, the system and other equipment.
Before Moving the System

Press 3 s, system will forced shut down and completely switch off the system.

Disconnect all cables from off-board peripheral devices (external printer, etc.) from the console.
NOTE

To prevent damage to the power cord, DO NOT pull excessively on the cord or sharply bend the cord while
wrapping it.

Store all probes in their original cases or wrap them in soft cloth or foam to prevent damage.

Replace gel and other essential accessories in the appropriate storage case.

Ensure that no loose items are left on the console.
When Moving the System

Carry the system with handle, or put the system on the cart to move it.
NOTE
Walk slowly and carefully when moving the system.
Do not let the system strike walls or doorframe.
Transporting the System
Use extra care when transporting the system in a vehicle. After preparing the system as described above, take
the following additional precautions:

Only use vehicles that are suitable for transport of the system.

Before transporting, place the system in its original storage carton.