CHIOSSI E CAVAZZUTI Speedy T 2005, Инструкция по эксплуатации

Страница: 23 / 29

23
via Costituzione 50/D 4201 5 Correggio (RE) Italy - Tel. +39 0522 637224 Fax. +39 0522 631 1 80 cc@chiossiecavazzuti.com
REGULATING BLADE POSITION
•Always switch the machine off to prevent it from being started by accident.
•Do not force the screws. If, when you turn them in one direction you encounter resistance, try
turning them in the opposite direction (the screw is probably all the way in or out).
Let's presume that our machine is configured with medium type blades (220 x 300 bag).
To install the small blades follow these steps:
1 - If installed, remove the support table used for bagging mode.
2- Change blades 4 and 5 .
3- Move blade 4 close to 1 .
4- Move blade 5 closer to 4.
5-Move blades 2 and 3 closer to 4 and 5.
6- If bagging mode is to be used, replace the top for the new format.
To install the large blades follow these steps:
1 - If installed, remove the top used for bagging mode.
2- Spread blades 2 and 3 as far apart as possible
3- Move blade 5 to the end of the machine.move blade 1 away change blades 4 and 5 .
4- Move blade 4 away from 5 to leave the right amount of space (See 7.3)
5- Move blade 1 closer to 4.
6- Move blades 2 and 3 close to 4 and 5.
7- Remove blades 2 and 3 and reinstall them at the correct distance from blade 1
8- If the machine is to be in bagging mode, place the top for the new format the figure shows that
blade 1 does not need to move.
9- The program best suited for this job is : 0-1 -5-6