12
via Costituzione 50/D 4201 5 Correggio (RE) Italy - Tel. +39 0522 637224 Fax. +39 0522 631 1 80 [email protected]
INSTALLATION
ASSEMBLY
When the volume of the transport box has considerable incidence on the cost of the transport (paid
by the customer), it can be delivered with the feet and the stacker cylinder (if ordered) disassembled
to reduce the shipping volume by about 30%. In this case, the assembly instructions will be
enclosed.
STACKER
If the machine is equipped with a "Stacker", its platform must be
raised and the support bow should be snapped into its seating.
FOOT PEDAL
1 -Remove the foot pedal and Start and Stop button from inside the
machine
2-The Start and Stop button can be attached on every side of the
machine.
3-Connect the power cord to a power socket.
REMOVING THE SIDE PANELS
The side panels snap into place. Once the retainers have been removed with a spanner, lift the
panel up to free it from the machine. The spare blades are inside this panel retained by an elastic.
Содержание Speedy T 2005
Страница 2: ......