21
via Costituzione 50/D 4201 5 Correggio (RE) Italy - Tel. +39 0522 637224 Fax. +39 0522 631 1 80 [email protected]
OTHER PROGRAMS
To handle special folding needs, each program can be modified by the user following the
instructions given in the specific "Electronic Instrument" manual. The name of the program can also
be changed. These operations should only be done by expert personnel. We recommend using
program N° 9 as the base for any modifications. If errors are made, a simple command will cancel
all the changed and reset the 1 0 standard programs.
SELECTING FOLDING BLADES
Blade numbering:
as a convention the blades are numbered as highlighted in Figure and these numbers will always
be used when referring to blades.
Blade 4 defines the size of the folded garment which must be
2-4 cm less than the bag used.
Blades 4 and 5 must have the same width.
OPERATOR WORK STATION
STACKING MODE:
The operator can work to one side of the machine or in
front of it.Working from the side can be more convenient
especially when folding sleeved garments. The operator in
this position does not have to bend forward to spread the
garment on the work table.
BAGGING MODE:
If the job is done by a single operator, the work station will
be behind the machine. In this case, fold the stacker
downwards so it is not in the way.
The machine can be run by two operators. In this case, the
operator who is to spread the garment on the work table,
will be at the side or in front of the machine. The operator
who positions the bag and removes the bagged garment,
should stand behind the machine.
USAGE
Содержание Speedy T 2005
Страница 2: ......