Chino AL3000 SERIES, Инструкция по эксплуатации

Страница: 33 / 116

6-4
6.4. Selection of Operation Screen
Three operation screens are switched from each other by pressing key once.
[Multi-point sequential display]
Measured
value
display
Measured values in CH1 to
CH6 (Measured values are
updated in about 5 seconds.)
Bargraph
display
Multipoint sequential display
(Channels are advanced at
about 5 seconds.)
[One-point continuous display]
Measured
value
display
Measured values in CH1 to
CH6 (Measured values are
updated in about 5 seconds.)
Bargraph
display
One-point continuous display
Channels are advanced by
key
Channels are advanced
reversely by key.
[clock display and others]
Upper side
○
1
Alarm-on channels
○
2
Chart speed
Clock
display and
others
Lower side Clock (year,
month, day, hour, minute)
Bargraph
display
One-point continuous display
Channels are advanced by
key.
Channels are advanced
reversely by key.
*This figure shows that alarms are on in
channels 1, 3 and 6.
In CH1 to CH3 only, the decimal point lights down to
2 places. Even if 3 places of decimals are
programmed in scale programming, no decimal point
lights.
Attach 0, if a measured value is less than 1.
<Example>
  
A bargraph display before programming continues.

Channel number of
mult-point sequential
bargraph.

Channel number of
one-point continuous
bargraph.
( lights at the lower
right part)

Digital printing is in
progress.
(Bargraph disappears)
Channel No.
Alarm-on channels* Chart speed
Bargraph in programming screen
Reference
Channel number display
Decimal point position in measured value display
Remarks