Chino AL3000 SERIES, Инструкция по эксплуатации

Страница: 40 / 116

7-7
7.4. Programming Procedures
This paragraph shows the basic programming parameters.
1. Basis of programming flow chart
Operation screen
(Measured value or time display)
Programmed parameters check
For programming condition
Programming (Programming by
numeric values or parameters
selection)
Same programming
to other channels ?
Temporary stored
Programming other
channels ?
Stored
Use [copy] function for convenient
operation. See par. 11.13.
Programming is interrupted to return to the
operation screen from every programming stage
by pressing [Display] key before [Entryl.
Keys depend upon programming parameters.
Necessary for certain programming parameters.
For parameters to be programmed for each
channel, check the programmed parameters of
other channels by keys.
○
1
Programming lamp lights and
○
2
the cursor appears at a
programmable digit.
If this procedure is omitted, programmed
parameters are not stored into memory.
(Note) Store same programmed parameters to
other channels by key.
○
1
Memory-colon flickers and
○
2
programming
change mark is printed*
Programmed parameters (including
temporarily stored programmed parameters)
are stored. Measurement is interrupted
during this storing period.
*Change mark is printed on the right side of the
chart. However, is not formed until the
chart advances because of "one-line writing".
3. Key operation
1) Numeric keys and cursor
Cursor shifts rightward when pressing numeric keys ( to , )
Press cursor keys ( ) for moving the cursor.
2) How to add or delete decimal point
For adding the decimal point, move the cursor to and press .
For deleting the decimal point, press key. (Numeric is also deleted)
3) Clearing a displayed programmed parameter
The programmed parameter is cleared by pressing + keys
[Programming
each channel ]
YES
YES
NO
NO
+
(Note)
( + )
Various keys
Reference
Cursor
Programming same
parameter to other channels
Reference

Memory - colon
Lights in case of one-point continuous
display in operation screen.
character indicator
Programming lamp
Character display
(abbreviations of programming parameters)
For longer
than 3 sec.