CHINESPORT Spa - ITALIA
mod.14-2013.10.16-10.10-002-ml.docx
11/32
GB
WARNING
actuators, control boxes, controls and spare battery can only be replaced. Opening or tampering
with any of these will void the warranty and the manufacturer's liability.
Internal spare parts are not available
To remove the electric kit, refer to chapter 9
5.3
Spare parts list
Spare parts list and exploded view will be request to Chinesport s.p.a. and includes also price list. (only
use original spare parts.)
6
TROUBLESHOOTING
The equipment has undergone heavy-duty tests; no significant breaks and/or failures were
reported.
If the equipment does not work, refer to the troubleshooting table below.
Problem
Cause
Solution
ELECTRIC HEIGHT ADJUSTMENT
Lift not working in one or
all directions.
Connectors
either
not
connected or not properly
plugged in
Check connections
Overload
Observe safe working load
Remove obstacles
No power supply
Check connection to mains power
Safety internal fuse burned out
Contact the assistance service
Side-bar mechanical fault
Contact the assistance service
Lift actuator, control or control
box is broken
Contact the assistance service
HYDRAULIC HEIGHT ADJUSTMENT
– SECTION ADJUSTMENT
Lift not working
Hydraulic piston is broken
Contact the assistance service
Section adjustment not
working
Gas spring damaged or needs
calibration
Contact the assistance service
Transmission cable broken
WHEELS KIT
wheels do not pirouette
Presence of dirt in the pin
remove dirt
The wheels do not touch
the ground when engaged
Setting foot wrong
Set the 4 regulation-feet of the bed
In case of troubleshooting table not solve your fail, you can open a service ticket means website
ATTENTION:
Before calling our technical support, be sure to have your
SERIAL NUMBER
to hand: you can find it on
the product label located on the equipment (as shown in the facsimile above); or the transport document /
invoice number. This identification number helps reduce waiting times and improves service quality
