chinesport UnionVisit LV1, Руководство пользователя и сервисное руководство

Страница: 7 / 32

CHINESPORT Spa - ITALIA
mod.14-2013.10.16-10.10-002-ml.docx 7/32
GB
4 USE
4.1 Starting
The bed is delivered packaged to protect it from possible damage that may occur during transport.
Never use cutters to open box to prevent padding damages
After unpacking, remove the protective packaging materials. See chapter 12 DISPOSAL OF WASTE
ELECTRICAL OR ELECTRONIC EQUIPMENT AND PACKAGING for disposal instructions. The carrier
and the supplier must be immediately notified of any damage that may have occurred during transport.
Damaged equipment cannot be used.
4.2 Height adjustment
–control configurations-
Depending on the configuration chosen, the following raise/lower controls will be available:
4.2.1 Configuration A-D-G (electric, w/ foot or hand control)
to raise the couch, press your foot on the sid
e of the foot switch marked by the “up" arrow.
Release at desired height. To lower, press the other side.
4.2.2 Configuration B (electric, w/ foot rail)
using your foot, press one of the lateral foot rails to raise; release at desired height. To lower, lift
one of the lateral rails.
4.2.3 Configuration C (hydraulic, pedal-operated)
press either of the two pedals to pump and raise the couch up to desired height; to lower, lift the
pedal with the back of your foot.
WARNING

While making up/down adjustments, look out for adjacent obstacles that may interfere with
panels.

Before using the equipment check its stability. Equipment must be placed far from steps, inclined
planes, etc.
4.3 Equipment
–basic options-
Depending on the configuration chosen, the following configurations will be available:
4.3.1
Configuration 2
– WHEELS KIT
to engage the retractable wheels, use your foot sole to push the PEDAL
lower of the device until it stops; to disengage, lift the small upper bar of
the pedal with the back of your foot.
It can move the couch by the retractable wheels only without
additional loads.
4.3.2 Configuration 3 - FOLD-DOWN SAFETY RAILS (LV1
AND LV2)
Mount the safety side rail:
1:lift it with both hands, in a parallel line, in order to release it from its seat;
2:rotate upwards until the normal use position is reached and push it
downwards to lock in place.
To fold down the safety rail, reverse the above procedure.
Should be used exclusively safety side rails Chinesport.
4.3.3 Configuration 4
– WHEELS KIT + FOLD-DOWN SAFETY
SIDE RAILS
See previous sections.
4.3.4 Configuration 7
– FOLD-DOWN SAFETY SIDERAILS
(only LV3)
To lower the rails: pull the knob with one hand and use the other to lower the rails.
To raise the rails: grip the rails and lift them until the stop, where they are automatically locked in
position.
1
2
PEDAL