Rev. 01 of 08/08/2013_CP Page 8 of 15
ATTENTION
Don't sprinkle with any liquid the lighted bulb of the lamp.
Don't touch the protective grid and/or the body of the device during its operation and
immediately after the switching off because there is danger of burns.
PROCEDURE FOR SAFETY TURNING OFF OF THE DEVICE
After each use of the device the safety turning off must be done as follows:
- If at least one timer is not zeroed, turn the knob counter clockwise and return the arrow to the “O”
position;
- Set all switches in (“O”) position;
- Disconnect the plug from the socket;
- Store in a clean and dry place.
ATTENTION
During the therapeutic session it’s necessary the control by the operator to avoid the risk that
the patient moves from his position, removes his eye protection or act on the control panel.
NOTICES FOR TRANSPORT AND STORAGE
During the transport it’s necessary to avoid shocks on the packaging containing the IR lamps.
In case of damaged packaging it’s necessary to check the functioning of the timer and the integrity of the IR
bulbs.
During operation, transport and storage it’s necessary to respect the following values:
OPERATION CONDITIONS
Temperature : 0°C÷30°C
Relative humidity : 10÷80%
Atmospheric pressure : 500÷1060 h Pa
TRANSPORT CONDITIONS
Temperature : -20°C÷60°C
Relative humidity : 10÷80%
Atmospheric pressure : 500÷1060 h Pa
