MSP-WLB/D SERIES
Installation Instructions
6
INSTALLATION
WARNING:
FAILURE TO PROVIDE ADEQUATE
STRUCTURAL STRENGTH FOR THIS COMPONENT CAN
RESULT IN SERIOUS PERSONAL INJURY OR DAMAGE
TO EQUIPMENT! It is the installer’s responsibility to make
sure the structure to which this component is attached can
support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
Slat Wall Mount Installation
WL2B, WL3B, WL9D, WL10D and WL13D
NOTE:
OFBU bracket is pre-installed on MSP-WL9D, WL10D
and WL13D. Only Steps 1-5 are required for MSP-
WL9D, WL10D and WL13D installation.
1.
Verify mounting brackets on OFBU bracket (V) can move
freely. (See Figure 1)
Figure 1
2.
Locate desired installation location and slide upper
mounting plate into wall making sure bracket is seated in
channel bottom. (See Figure 2)
3.
Let lower mounting plate rest against wall.
4.
Using 1/2” socket, tighten tension hex head bolt until lower
mounting plate slides into channel in wall and continue
tightening until resistance is felt. (See Figure 2)
Figure 2
5.
Tighten two upper and lower button head cap screws to
secure wall bracket (V) to wall. (See Figure 3)
Figure 3
x4
(V)
1
(V)
2
3
4
(V)
4
x4
(V)
5
5
Содержание MSP-WL10D
Страница 21: ...Installation Instructions MSP WLB D SERIES 21 ...
Страница 22: ...MSP WLB D SERIES Installation Instructions 22 ...
Страница 23: ...Installation Instructions MSP WLB D SERIES 23 ...