Chicco 06836M, Руководство пользователя

Страница: 23 / 28

23
INSTRUCTIONS FOR
USE
NaturalFeeling feeding bottles
Please read these instructions carefully before use
and keep them for future reference.
For your child's safety and health.
WARNING:
• Always use this product with adult supervision.
• Never use feeding teats as a soother.
• Continuous and prolonged sucking of fluids will cause
tooth decay. This may occur if the baby is allowed to use
the feeding bottle for long periods of time, even when
drinking unsweetened drinks.
• Always check food temperature before feeding. This is to
prevent the risk of scalding.
• Always inspect the teat before each use by pulling it in
every direction. Throw away at the first sign of damage or
weakness.
• In any case, we recommend replacing teats at least every
two months.
• Do not leave teats in direct contact with sunlight or a heat
source; do not leave it in disinfectant (sterilisation solution)
for longer than recommended as this may damage them.
• Check that the flow is suited to the baby’s requirements,
paying attention to any sucking problems or to milk com-
ing out of the baby’s mouth.
• Inspect the feeding bottle before each use, making sure
there are no broken parts or sharp edges.
• Give your baby food and drink according to your paediatrician’s
recommendations and the preparation methods indicated by
the makers.
• Do not allow your baby to run or play with the product.
• Use only genuine components and spare parts from the
NaturalFeeling range.
• Keep all components not in use out of the reach of children.
• Remember that breastfeeding is best for your child.
INSTRUCTIONS – Cleaning
• Wash before first use.
• Before using for the first time, immerse in boiling water for
5 mins. This ensures that it is sterile.
• Wash with hot water and washing up liquid before every
use, then rinse thoroughly.
• It is preferable to wash the bottle by hand, avoiding abra-
sive products; washing it in the dishwasher may cause the
product to wear more quickly.
• If bottle brushes are used, make sure you do not damage
the more delicate parts of the product (e.g. teat openings
and valves).
• Sanitise before use.
• Make sure that no liquid remains inside after washing or
sanitising.
• Store in a clean, dry place.
• Pigmentation in some foods (e.g. tomato sauce) and
strongly-coloured drinks (e.g. tea, fruit juices) may alter the
colour of the product.
SANITISING
• During boiling or hot sanitising, the feeding bottle must be
opened and disassembled in order to prevent it from de-
forming.
• The product may be sanitised using cold sterilisation solu-
tions, or hot methods (steam) using suitable equipment or
by boiling for 5 minutes, avoiding contact with the metal
walls of the container used.
• UV sterilisers are not recommended.
Assembly
• Make sure that the product is assembled correctly before
use to ensure the correct functioning of the feeding bottle
and to prevent any leaks.
Warming the feeding bottle
• To warm the contents, we recommend using the special
feeding bottle warmers after removing the cap.
• Take extra care when microwave heating:
• Insert the bottle only after removing the ring, and teat:
Risk of explosion.
• If you use a combination microwave oven, ensure that the
grill is turned off.
• Always stir heated food to ensure even heat distribution
and test the temperature before serving to prevent scald-
ing your baby.
• Do not heat the product in traditional ovens or on hot
plates or open flames.
• It can be placed in a freezer. Remove the teat and use the
cap provided for storage.