Chicco 06836M, Руководство пользователя

Страница: 21 / 28

21
Problem Cause Solution
The breast pump does not pump
or pumps very little.
Valve not assembled or not properly
assembled. Assemble the valve correctly.
Cup and motor body not assembly
correctly. Check that you have performed
the procedure described in the
“PREPARATION” paragraph correctly.
Make sure that the silicone tube is
firmly connected to both the engine
body and the membrane cover. Check
that the tube is not damaged.Do not
twist the tube during milk expression.
The cup does not fit well on the breast Fit the pump body over your breast,
taking care that your nipple is properly
centred. Try with/without the soft
silicone cover.
Suction level not correctly adjusted. Change the suction level until you
achieve more comfortable stimulation
and suction by pressing the “+” or “-”
buttons.
Run-down and/or insufficiently
charged batteries. Replace the batteries.
Milk expression is painful. Suction level too high.
Change the suction level until you
achieve more comfortable stimulation
and suction by pressing the “-” button.
The breast pump does not switch
on
Failure of mains adapter and/or appliance. Check that mains power is present.
Check the position of the batteries in
the battery compartment.
Incorrect connections. Check all the connections.
Run-down batteries. Replace the batteries.
TECHNICAL SPECIFICATIONS
- ELECTRIC BREAST PUMP Mod. 06836M 00009199000590
- Maximum vacuum level in extraction mode: -0.35 ± 0.03 bar**
(** Values measured with sample cylinder. CI 95%)
- Type of appliance: intermittent operation; 30 minutes ON - 30 minutes OFF
- Motor body weight: 165 g excluding batteries
- Engine body’s dimensions: Base 98 mm X Hight 105 mm X Depth 70mm
- Made in China
Storage, preservation and transportation conditions:
- Ambient temperature: -20 / +60°C
- Relative humidity: 10 to 85%
Operating conditions:
- Operating temperature: +5°C / +40°C
- Relative humidity: 30 to 85%
CURRENT ADAPTER (NETWORK ADAPTER):
100V - 240V ~ 50/60 Hz 0.5A Output: 6V 1A
ELECTRIC BREAST PUMP Input 6V 1A
Works with the power adapter or 4 x AA 1.5 V alkaline batteries each (not included)